From: C Chan (cch.ccie@gmail.com)
Date: Mon Mar 31 2008 - 22:06:21 ART
Hi Joseph,
If I do not use any QoS feature (eg LFI), do I still need to enable
fragmentation?
Meanwhile, my configuration (without FRTS) is still working by using simple
PING test. How can I discover the potential problem if not enabling FRTS?
Appreciate if you could share the experience with me.
Regards,
CH
On Mon, Mar 31, 2008 at 12:57 PM, Joseph Saad <joseph.samir.saad@gmail.com>
wrote:
> How do you enable fragmentation without FRTS?
>
>
>
> On Mon, Mar 31, 2008 at 7:47 AM, C Chan <cch.ccie@gmail.com> wrote:
>
> > Hi all experts,
> >
> > Is it mandatory to turn on frame-relay shaping when running MLPoFR?
> >
> > According to DocCD, the FRTS is prerequisite for MLPoFR, I am wondering
> > the
> > rationale might relate to QoS topic it describes.
> >
> > Practically, I tried the MLPoFR *without* enabling FRTS, it still works
> > fine. However, the router prompt me the following error message if I do
> > not
> > enable FRTS.
> >
> > Could anybody share his experience when dealing with MLPoFR? What is the
> > consequence if I do not turn on FRTS?
> >
> > Regards,
> > CH
> >
> > *Remark*
> >
> > ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> > (Using Multilink PPP over Frame Relay)
> >
> > http://www.cisco.com/en/US/docs/ios/12_4/qos/configuration/guide/qslfifr.html#wp1064366
> > ,
> >
> > 12.3(22)
> > Router1#
> > *Mar 1 02:29:25.887: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly
> > on
> > Link Virtual-Access1 Bundle Multilink34 :Frame Relay traffic shaping
> > must be
> > enabled
> > *Mar 1 02:29:25.899: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly
> > on
> > Link Virtual-Access2 Bundle Multilink34 :Frame Relay traffic shaping
> > must be
> > enabled
> >
> > 12.4(18)
> > Router2#
> > *Mar 30 09:16:17.835: %LINK-3-UPDOWN: Interface Multilink35, changed
> > state
> > to down
> > *Mar 30 09:16:17.911: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly
> > on
> > Link Virtual-Access1 Bundle Multilink35 :Frame Relay traffic shaping
> > must be
> > enabled
> > *Mar 30 09:16:17.915: %LINK-3-UPDOWN: Interface Multilink35, changed
> > state
> > to up
> > *Mar 30 09:16:17.923: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly
> > on
> > Link Virtual-Access2 Bundle Multilink35 :Frame Relay traffic shaping
> > must be
> > enabled
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:55 ART