From: Hunt, Richard (LDN-GIS) (Richard.Hunt@interpublic.com)
Date: Thu Mar 27 2008 - 06:07:40 ART
Hi All,
I'm trying to prioritize one particular IP subnet outbound through a
Tunnel interface on a Cat 6500.
I've tried MQC using nested policies (needed in IOS for Tunnel
interfaces genrally) which generates this message "MQC features are not
supported for this interface"
Eg #1
class-map match-all voice-budapest
match access-group name voice-budapest
policy-map voice-budapest
class voice-budapest
priority 2000000
policy-map Tunnel-67
class class-default
shape average 8000000
service-policy voice-budapest
Extended IP access list voice-budapest
10 permit ip any 10.20.208.0 0.0.0.255
6500(config-if)#service-policy output Tunnel-67
MQC features are not supported for this interface
and I also tried simple priority queuing.
However, this beast is proving difficult.
Does anyone have any experience of how I could achieve this?, It (the
6500) is running a L3 image with a PFC2.
This message contains information which may be confidential and privileged.
Unless you are the intended recipient (or authorized to receive this message
for the intended recipient), you may not use, copy, disseminate or disclose to
anyone the message or any information contained in the message. If you have
received the message in error, please advise the sender by reply e-mail, and
delete the message. Thank you very much.
(A)
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:54 ART