From: Shine Joseph (shinepjoseph@iprimus.com.au)
Date: Wed Mar 26 2008 - 22:02:18 ART
The reflector port must be an unused port in case of 3550, generally a
Gigabit port. Other than that I think the configuration is alright.
We can't get colours in the group e-mail. You must unicast to get us
colours:)
HTH,
Shine
On SW1 ( VTP Server )
vlan 555
name Remote_span
remote-span
on Sw3
monitor session 1 source interface fa 0/5
monitor session 1 destination remote vlan 555 reflector-port fa 0/5 # (3550)
monitor session 1 destination remote vlan 555 #(3560 )
On Sw4
monitor session 1 source remote vlan 555
monitor session 1 destination interface fa 0/9
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Z
Linux
Sent: Thursday, 27 March 2008 10:17 AM
To: ccielab@groupstudy.com
Subject: REMOTE_SPAN ( Question )
Hi 2 all,
Let me know if this looks ok.... I have concern about the lines marked in
RED...
<Q>
configure SPAN. You should Monitor the traffic from the port 5 of SW3 and
the
sniffer is connected at port 9 of SW4
<A>
On SW1 ( VTP Server )
vlan 555
name Remote_span
remote-span
on Sw3
monitor session 1 source interface fa 0/5
monitor session 1 destination remote vlan 555 reflector-port fa 0/5 # (3550)
monitor session 1 destination remote vlan 555 #(3560 )
On Sw4
monitor session 1 source remote vlan 555
monitor session 1 destination interface fa 0/9
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:54 ART