From: Huan Pham (huan.pham@valuenet.com.au)
Date: Wed Mar 26 2008 - 21:38:10 ART
Hi,
I do not know what line you highlighted in RED, as my plain text monitor is
just black and white (j/k).
For 3550, you should use an UNUSED port as the reflector port. You cann't
used Fa0/5 as in your config.
monitor session 1 destination remote vlan 555 reflector-port fa 0/24
(if fa0/24 is not used, or if it belongs to someone you do not like, haha -
Mr. Scott Morris used to do this to his workmate).
Cheers,
Huan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Z
Linux
Sent: Thursday, 27 March 2008 10:17 AM
To: ccielab@groupstudy.com
Subject: REMOTE_SPAN ( Question )
Hi 2 all,
Let me know if this looks ok.... I have concern about the lines marked in
RED...
<Q>
configure SPAN. You should Monitor the traffic from the port 5 of SW3 and
the
sniffer is connected at port 9 of SW4
<A>
On SW1 ( VTP Server )
vlan 555name Remote_spanremote-span
on Sw3monitor session 1 source interface fa 0/5monitor session 1 destination
remote vlan 555 reflector-port fa 0/5 # (3550)monitor session 1
destination remote vlan 555 #(3560 )
On Sw4monitor session 1 source remote vlan 555monitor session 1 destination
interface fa 0/9
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:54 ART