From: Noor.Yousuf@shell.com
Date: Mon Mar 24 2008 - 08:07:23 ART
Experts,
Quick question for all of you
Connected interface(G0/1)---R2------ospf over FR-----R3
|
|
EIGRP(G0/0)----R5
When I use simple mutual redistribution b/w OSPF and EIGRP, it does work fine, as soon as I try to redistribute connected interface into OSPF which is not part of any routing protocol through Route-map, my EIGRP network gets drop on R3....any thoughts will be appreciated
Here is the config of R2
interface GigabitEthernet0/0
ip address 16.16.17.2 255.255.255.0
duplex auto
speed auto
!
interface GigabitEthernet0/1
ip address 150.5.16.1 255.255.255.0
duplex auto
speed auto
!
interface Serial0/0/0
ip address 16.16.12.2 255.255.255.248
encapsulation frame-relay
ip ospf priority 0
frame-relay map ip 16.16.12.3 413 broadcast
frame-relay map ip 16.16.12.5 413 broadcast
no frame-relay inverse-arp
frame-relay lmi-type cisco
router eigrp 16
redistribute ospf 1 metric 1500 1 255 1 1500
network 16.16.17.2 0.0.0.0
no auto-summary
!
router ospf 1
router-id 2.2.2.2
log-adjacency-changes
redistribute connected metric 100 subnets route-map bb2
redistribute eigrp 16 metric 50 subnets
network 2.2.2.2 0.0.0.0 area 0
network 16.16.12.2 0.0.0.0 area 0
!
ip prefix-list bb2 seq 5 permit 150.5.16.0/24
route-map bb2 permit 10
match ip address prefix-list bb2
Thanks,
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:54 ART