Re: Need help on BGP

From: abdul muhammed (abdulmuri@gmail.com)
Date: Fri Mar 14 2008 - 12:56:22 ARST

when I configured EIGRP between the routers, the interface to the routers
where reachable.

does that imply that I have to use Interior gateway routing protocol within
the routers within the same AS

On Fri, Mar 14, 2008 at 1:30 PM, Eric Leung <eric.lwc@gmail.com> wrote:

> R2 doesn't have the route to the R3-R4 interface. and the same for R3.
>
> 2008/3/14, abdul muhammed <abdulmuri@gmail.com>:
> >
> > Hi GS,
> >
> >
> > R1---> R2---->R4-------R3
> > I have R1 (AS 200), R2,R4 (AS 100) and R3(AS 200)
> >
> > R1 peer wt R2 via eBGP
> > R2 peered wt R4 via iBGP
> > R3 peered wt R4 via ebgp
> >
> > I can see routes from R3 in R2 routing table but i cannot ping R4
> >
> > also I can see R2 route in Router 3 routing table but I cannot ping R2
> >
> > please help
> > --
> > Abdul Muhammed Murtala
> > AMerican University of Nigeria
> > Lamido Zubairu way, Yola
> > Adamawa
> > +2348052001153, +2348056201237
> >
> > Network Manager
> > MCSE,MCDBA,MCSA,OCPDBA,CCNA,CCIE Written.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
> 

-- 
Abdul Muhammed Murtala
AMerican University of Nigeria
Lamido Zubairu way, Yola
Adamawa
+2348052001153, +2348056201237

Network Manager
MCSE,MCDBA,MCSA,OCPDBA,CCNA,CCIE Written.

This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:53 ART