From: YourPal (dearprudence28@gmail.com)
Date: Thu Mar 13 2008 - 10:06:41 ARST
Hi Akhi,
I'm aware of this feature. I have tried it but it's not effective on a frame
relay physical interface.
Thank you.
BR,
Emil
On 3/13/08, AKHILESH THAKUR <akhi_thakur@hotmail.com> wrote:
>
> Dear Emil,
> I think you can use End to End keepalive option to track the pvc status.
>
> Regards
> Akhi
>
> > Date: Thu, 13 Mar 2008 13:00:20 +0200
> > From: adelkarim@gmail.com
> > To: dearprudence28@gmail.com
> > Subject: Re: HSRP tracking of Frame Relay physical interface
> > CC: ccielab@groupstudy.com
> >
> > Hi Emil,
> >
> > Yes, in this case you should create a GRE tunnel with keepalives to be
> able
> > to track the PVC state.
> >
> > Of course there are other means of tracking that you can use like route
> > reachability or SLA.
> >
> > I don't think the proctor will be helping you here since he/she will be
> > telling you how to answer the question.
> >
> > HTH
> > Adel Karim Mansour
> >
> >
> > On Thu, Mar 13, 2008 at 12:50 PM, YourPal <dearprudence28@gmail.com>
> wrote:
> >
> > > Hi Group,
> > >
> > > I have a HSRP and frame relay setup as follows:
> > >
> > > R5 (fa0/0)--------(fa0/0) R1 (s0/0/0)------FrameRelay------(s0/0/0.125
> mp)
> > > R2
> > >
> > > R1:
> > > int s0/0/0
> > > ip add 10.10.125.1 255.255.255.0
> > > enca fram
> > > no frame inver
> > > fram map ip 10.10.125.2 102 br
> > > !
> > > int f0/0
> > > ip add 10.10.15.1 255.255.255.0
> > > stand 1 ip 10.10.15.254
> > > stand 1 prio 110
> > > stand 1 preempt
> > > stand 1 track Serial0/0/0 20
> > > !
> > >
> > > R5:
> > > int fa0/0
> > > ip add 10.10.15.5 255.255.255.0
> > > stand 1 ip 10.10.15.254
> > > stand 1 preempt
> > > !
> > >
> > > Say, R5 need to take over the HSRP active role if R1's frame relay
> > > connection is down. I understand that if we have a frame relay
> connection
> > > using physical interface, the interface will never go down as long as
> LMI
> > > is
> > > working fine.
> > >
> > > In this case, the HSRP tracking is effective if int s0/0/0 itself is
> down
> > > but not when int s0/0/0 on R2 is down. Correct me if I'm wrong. To
> work
> > > around, are you bothered to configure a GRE tunnel (with keepalive)
> > > between
> > > R1 and R2 and track this tunnel interface in HSRP on R1?
> > >
> > > I may be overthinking. I'd like to hear your opinion. It's best to
> clarify
> > > with the proctor in the real lab to clear any ambiguity.
> > >
> > >
> > > Thank you.
> > >
> > > BR,
> > > Emil
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> >
> >
> >
> > --
> > Regards
> > Adel Karim Mansour
> > CCIE# 20147 R&S
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> ------------------------------
> It's about getting married. Click here! Try it!<http://ss1.richmedia.in/recurl.asp?pid=201>
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:53 ART