From: Tony Schaffran \(GS\) (groupstudy@cconlinelabs.com)
Date: Sun Mar 09 2008 - 13:55:29 ARST
It also looks like you forgot to include your 154.1.38.0/24 network.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
YourPal
Sent: Sunday, March 09, 2008 5:24 AM
To: Cisco certification
Subject: Enabling OSPF using minimum network statements
Hi Group,
A router has the following IP addresses:
!
interface FastEthernet0/0
ip address 154.1.38.3 255.255.255.0
!
interface FastEthernet0/1
ip address 154.1.3.3 255.255.255.0
!
interface Serial0/0
ip address 154.1.0.3 255.255.255.0
!
interface Serial0/2
ip address 154.1.13.3 255.255.255.0
!
interface Serial0/3
ip address 154.1.23.3 255.255.255.0
!
The task requires to enable OSPF area 0 on interfaces Fa0/1, s0/2, and s0/3
using the minimum amount of network statements necessary. Do not enable area
0 on any other interfaces.
As hard as I tried, I'm not able to use minimum network statements to cover
those 3 interfaces without covering s0/0. So I configured 3 statements as
follows (to me, this is the min.):
!
router ospf 1
network 154.1.3.3 0.0.0.0 area 0
network 154.1.13.3 0.0.0.0 area 0
network 154.1.23.3 0.0.0.0 area 0
!
Let me know if you have a solution that meets the task requirement.
Thank you.
BR,
Emil
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:53 ART