From: Joseph Brunner (joe@affirmedsystems.com)
Date: Fri Feb 29 2008 - 22:12:01 ARST
Aqui esta otro vez; pero tu puedes encontrar en los archivos tambien
amigo...
You can load balance multicast traffic two ways...
1. with the "ip multicast multipath" command. This requires two unicast
senders (sources) of the feed
2. with a gre tunnel. Configure a gre tunnel between two router's loopbacks
(source/destination) and let the IGP load balance the path between the two
loopbacks across the physical interfaces.
I use the GRE myself, as it load balances one feed, with only one sender, as
is often the case in a production network (i.e. one ghost server, one ghost
recipient, two point to point t-1's etc)
This is one of those valuable ccie study things you can use in the real
world...
-Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Dennis Worth
Sent: Friday, February 29, 2008 4:27 PM
To: Cisco certification
Subject: Help with multicast load splitting
Hi group,
Anyone have a quick run down on this works?
Thanks,
-- Dennis Worth
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:50 ARST