From: Rich Collins (nilsi2002@gmail.com)
Date: Thu Feb 21 2008 - 20:49:05 ARST
It looks like I made a mistake under the BGP. The eigrp's automous-system
ID's have to match the vrf (not the corresponding one as I first showed).
address-family ipv4 vrf JP
redistribute connected
redistribute eigrp <AS of JP>
exit-address-family
!
address-family ipv4 vrf IPEXPERT
redistribute connected
redistribute eigrp <AS of IPEXPERT>
exit-address-family
On 2/17/08, Rich Collins <nilsi2002@gmail.com> wrote:
>
> I found this link in my notes:
> http://www.gossamer-threads.com/lists/cisco/nsp/80981
>
> It looks like you need additionally a standalone bgp instance (no neighbor
> necessary). Something along the lines of:
>
> You will have to check who much of the "redistribute connected" you will
> need.
>
> router bgp 99999
> !
> address-family ipv4
> redistribute connected
> exit-address-family
> !
> address-family ipv4 *vrf* JP
> redistribute connected
> redistribute *eigrp* IPEXPERT
> exit-address-family
> !
> address-family ipv4 *vrf* IPEXPERT
> redistribute connected
> redistribute *eigrp* JP
> exit-address-family
>
>
> -Rich
>
> On 2/14/08, Luan Nguyen <luan.m.nguyen@gmail.com> wrote:
> >
> > Hi guys,
> > Say i have VRF JP one one of the interface, and VRF IPEXPERT on another
> > interface. And i need to run EIGRP on both of them. They have their
> > own
> > ASN and don't want to change them. How do i send routes learned from JP
> > into IPEXPERT and vice versa? From the command line, EIGRP doesn't
> > allow
> > redistribution of EIGRP from VRF.
> >
> > Sample config is something like this:
> > router eigrp 1
> > passive-interface default
> > no passive-interface Tunnel0
> > no auto-summary
> > !
> > address-family ipv4 vrf IPEXPERT
> > network 10.0.0.0 0.0.1.255
> > no auto-summary
> > autonomous-system 1
> > exit-address-family
> > !
> > router eigrp 2
> > passive-interface default
> > no passive-interface tunnel1
> > no auto-summary
> > !
> > address-family ipv4 vrf JP
> > network 10.1.1.1 0.0.0.0
> > no auto-summary
> > autonomous-system 1
> > exit-address-family
> >
> >
> > DMVPNSite1R1(config-router-af)#redistribute eigrp 1 ?
> > metric Metric for redistributed routes
> > route-map Route map reference
> > <cr>
> >
> > No VRF option there, unlike say OSPF
> >
> > DMVPNSite1R1(config-router-af)#redistribute ospf 1 ?
> > match Redistribution of OSPF routes
> > metric Metric for redistributed routes
> > route-map Route map reference
> > vrf VPN Routing/Forwarding Instance
> > <cr>
> >
> > Is there a way to advertise routes between them?
> >
> > TIA
> >
> > -lmn
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:49 ARST