From: Ron Lim (gottobeccie@gmail.com)
Date: Fri Feb 08 2008 - 02:27:37 ARST
Hi Gopal,
My understanding is that cisco 2950 only support dot1q encapsulation
and hence by default it's only that encapsulation. When trunking is in
used, it does not need to specify which type.
Only the 35xx model support. ISL and dot1q. Model such as 3524, 3548,
3550 and 3560. Not such on higher model of 29xx such as 2960 and 2970.
HTH
Regards,
Ron
On 2/7/08, Gupta, Gopal (NWCC) <gopal.gupta@hp.com> wrote:
> Hi All
>
> Is it possible to run this command on the cat 2950 switch i.e. "Vlan
> dot1q tag native" or any other alternative?
>
> Thanks in advance,
> Gops
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:47 ARST