From: Rajat Chauhan (rachauha@cisco.com)
Date: Tue Feb 05 2008 - 07:47:15 ARST
Use neighb "peer group name" route reflector client or remove the neighbor
from peer group if you only want this specific neighbor as route reflector
client.
rachauha
CCIE#19814
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tapas Das
Sent: Tuesday, February 05, 2008 3:08 AM
To: ccielab@groupstudy.com
Subject: BGP Peer Group Error
router bgp 1013 no synchronization bgp router-id 3.3.7.7 bgp cluster-id 1013
bgp log-neighbor-changes neighbor AS-Internal peer-group neighbor
AS-Internal
remote-as 1013 neighbor AS-Internal update-source Loopback0 neighbor
AS-Internal send-community both
SW1(config-router)#nei 3.3.9.9 peer-group AS-Internal
SW1(config-router)#nei 3.3.9.9 route-reflector-client % Invalid command for
a
peer-group member ---> WHY AM I GETTING THIS ERROR ??
Note :I have other neighbors in IBGP, but they are not RR-Clients
Thnx in Advance
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:47 ARST