From: Avner Izhar (aizhar@ccbootcamp.com)
Date: Tue Feb 05 2008 - 04:24:22 ARST
Hi,
Generally you need to have some sort of ios cor (dial-peer cor), unless your analog phone is configured to be an ephone, then you can set it using 'after-hours block' commands.
Post your current config and I can help with the required changes.
Good Luck,
-------------------------------------------
thanks,
Avner Izhar
CCIE#15999 (Voice), CCVP, CCSI# 31623
Technical Training Manager
CCBOOTCAMP - A Cisco Sponsored Organization (SO)
Email: aizhar@ccbootcamp.com
Toll Free: 877-654-2243
Direct: +1-702-968-5100 = Outside the USA
FAX: +1-702-446-8012
YES! We take Cisco Learning Credits!
Training And Remote Racks: http://www.ccbootcamp.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Kubrat Vapzarov
Sent: Monday, February 04, 2008 07:24
To: ccielab@groupstudy.com
Subject: CME Analog Phone Configuration
Hello guys,
A quick question about how to allow/restrict certain phone numbers in CME. We have a conference room phone which needs to be able to make an emergency and local phone calls only. All the long distance and international calls are to be denied. The conference room phone is an analog phone connected to the CME router via an analog port. Any suggestions on what the config might look like?
Thanks,
Kubrat
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:47 ARST