From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sun Feb 03 2008 - 23:07:08 ARST
If you look at the documentation for the "in" and "out" option it will
answer your question as to why it's not used. Basically it's used for
Frame-Relay SVCs and we're doing PVCs.
HTH,
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: +1-775-544-1653 (Outside the US and Canada)
>----- Original Message -----
Subject: IEWB Dynagen Lab 1, Section 7.1 QoS-FRTS
Date: Sat, February 2, 2008 1:25
From: "Deepinder Singh Babbbar" <dsbabbar@gmail.com>
> Hi,
>
> I was working on IEWB for dynagen Lab 1, Section 7.1 QoS - FRTS. I have a
> doubt regarding what should be the sollution.
>
> Question goes like this - "R5 should send at an average rate of 128Kbps on
> DLCI 513 to R3."
>
> My doubt is since the question talks about "SEND" should the command in
> map-class frame-relay be :
>
> frame-relay cir out 128000 (which would leave the cir in to the default of
> 5600)
>
>
> OR
>
> frame-relay cir 128000 (which would affect both in and out)
>
>
> Thanks
>
> Deepinder Singh Babbar
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:47 ARST