From: Germany (ccie.gergonza@gmail.com)
Date: Fri Feb 01 2008 - 23:15:37 ARST
Can you elaborate a little more on the error and post the configs? What
mode are the interfaces configured on and are you using "ip pim autorp
listener"?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
wim.depauw@getronics.com
Sent: Thursday, January 31, 2008 7:42 AM
To: ccielab@groupstudy.com
Subject: CCIE lab :Mroute Configuration
Hi,
I had an interesting discussion with one of my collegues about one of the
labs of Internetwork expert and the use of mroutes.
When we have double uplink (let's suppose S1/1 and fa0/0) and we want to
send the multicast traffic via the serial link.Our routing protocol will
show the best path via the Fa0/0 so we will get an RPF problem.
=> We configure an mroute for the source
BUT when we do a debug ip mpacket we will still get an error message for the
groups 224.0.0.39 and 224.0.0.40 although it functions fine .
Do we need to configure an mroute also for the Mapping agent and the RP ?
My opinion is that we don't need to do it because the groups 224.0.0.39-40
are in dense mode so they are received anyway.
How do we need to do this in the exam ?
gr
wim
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:47 ARST