From: Kim teu (kim.teu@gmail.com)
Date: Tue Jan 29 2008 - 17:35:47 ARST
Disable split-horizon. use distribute-list to filter out and allow the
networks in the hub.
On 1/29/08, John <jgarrison1@austin.rr.com> wrote:
>
> Ahhh that works, but what if I have other networks that I want advertised
> between the spokes. I'm trying to see if I can do this without
> default-information originate and prefix-list 0.0.0.0/0 applied to a
> distribute-list out, which would filter all my networks
>
> ----- Original Message -----
> *From:* Kim teu <kim.teu@gmail.com>
> *To:* John <jgarrison1@austin.rr.com>
> *Cc:* ccielab@groupstudy.com
> *Sent:* Tuesday, January 29, 2008 11:45 AM
> *Subject:* Re: Rip distribute list
>
>
> Looks like all you need is split-horizon.
>
> On 1/28/08, John <jgarrison1@austin.rr.com> wrote:
> >
> > I'm trying to figure out if it's possible to filter networks from being
> > advertised to spokes by a hub routers serial interface using just the
> > physical
> > interface no subs or interface-dlci's. Say I have the 10.0.0.0 network
> > for
> > the frame cloud. I have 4.0.0.0 and 5.0.0.0 on the spokes R4 and R5 and
> > I
> > want to filter 4.0.0.0 from R5 and vice versa.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> May All Behappy!!!
> www.kimteu.com
>
>
-- May All Behappy!!! www.kimteu.com
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:02 ARST