From: Scott Morris (smorris@ipexpert.com)
Date: Mon Jan 28 2008 - 11:36:50 ARST
Ummmm.... Actually, there are 1,078,203,909,375 possibilities. Each value
is 8-bits. :) (That's over 1 trillion and a little longer than we have
time to test out!)
Cat2-MST(config-router)#metric weights 0 ?
<0-255> K1
Cat2-MST(config-router)#metric weights 0 1 ?
<0-255> K2
Cat2-MST(config-router)#metric weights 0 1 1 ?
<0-255> K3
Cat2-MST(config-router)#metric weights 0 1 1 1 ?
<0-255> K4
Cat2-MST(config-router)#metric weights 0 1 1 1 1 ?
<0-255> K5
Cat2-MST(config-router)#metric weights 0 1 1 1 1 1 ?
<cr>
Cat2-MST(config-router)#metric weights 0 1 1 1 1 1
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M
#153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
VP - Technical Training - IPexpert, Inc.
IPexpert Sr. Technical Instructor
A Cisco Learning Partner - We Accept Learning Credits!
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
http://www.ipexpert.com
-----Original Message-----
From: Darren Johnson [mailto:dazza_johnson@yahoo.co.uk]
Sent: Monday, January 28, 2008 4:46 AM
To: 'Scott Morris'; wim.depauw@getronics.com; ccielab@groupstudy.com
Subject: RE: IPexpert lab 36 :Troubleshooting K-values
Failing that, there are only 32 possible combinations. Try them all!!
0 0 0 0 0
0 0 0 0 1
Etc
LOL!! Not a good use of time in the lab ;-)
Dazzler
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Scott Morris
Sent: 27 January 2008 14:45
To: wim.depauw@getronics.com; ccielab@groupstudy.com
Subject: RE: IPexpert lab 36 :Troubleshooting K-values
Nope. No method of discovering those other than very carefully re-reading
your lab scenario to get a hint of what othe option may be added/changed.
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M
#153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
VP - Technical Training - IPexpert, Inc.
IPexpert Sr. Technical Instructor
A Cisco Learning Partner - We Accept Learning Credits!
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
wim.depauw@getronics.com
Sent: Saturday, January 26, 2008 11:05 AM
To: ccielab@groupstudy.com
Subject: IPexpert lab 36 :Troubleshooting K-values
Hi,
How can I troubleshoot K-values mismatches ? In lab 36 you need to change
the k-values which raised the question with me how to troubleshoot it .
Suppose that the change the K-values on the backbone routers in the lab...
Is there a debug/show command whichs shows me the k-values that are
received/send by an EIGRP neighbor.
I tried all the debugging commands but no luck ...
gr
wim
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:02 ARST