From: George Goglidze (goglidze@gmail.com)
Date: Mon Jan 28 2008 - 07:51:10 ARST
Hi there,
Sorry my bad, I had dynamips .net file configured to start with initial
config.
so when I would stop/start the router it would start-up with initial config
again,
and ip sla was gone...
I did not remember I had .net file with initial config, so I thought that
was ip sla feature going away after restart.
Many thanks anyway.
On Jan 28, 2008 6:43 AM, Brian Dennis <bdennis@internetworkexpert.com>
wrote:
> George,
> They do not reload your routers before the grading. Also why would your
> IP SLA configuration be gone after a reload?
>
> Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: +1-775-544-1653 (Outside the US and Canada)
>
> >----- Original Message -----
> Subject: ip sla operation
> Date: Sun, January 27, 2008 7:23
> From: "George Goglidze" <goglidze@gmail.com>
>
> > Hi all,
> >
> > I have one question,
> >
> > what if on exam they ask you to configure some kind of SLA operation.
> > ping or whatever they want.
> >
> > and you configure it , and it works fine.
> >
> > but as I've heard before, they reload all routers before they run
> scripts to
> > check your configs.
> > and SLA is gone after reload.
> >
> > how do they check that?
> >
> > Many thanks for you answer,
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:02 ARST