From: Greg Wendel (gwendel@gmail.com)
Date: Mon Jan 21 2008 - 04:04:45 ARST
Jason,
Have you tried the first few labs of any of the great vendors on this list?
They give very good explanations as well as links to other resources.
Most of the vendors have sample labs that you can download to get a feel for
them.
Hope this helps,
Greg,
On Jan 21, 2008 12:41 AM, <madsen.jason@gmail.com> wrote:
> Does anyone know and/or have a good reference for Broadcast usage as it
> pertains to Frame Relay? I looked through several frame relay broadcast
> related sections in the DOC CD (e.g. 12.4 -> WAN -> Config -> Frame Relay
> and also the Command Reference section), but found that they were all quite
> vague. I've heard and seen several "rules" pertaining to its use such as:
>
> - only use it once per DLCI per interface (or subinterface if that's what
> you happen to be using) instance e.g.
>
> r1(config-if)#frame-relay map ip 10.10.10.3 101 broadcast
> r1(config-if)#frame-relay map ip 10.10.10.4 101 //don't use it
> here
>
> - only use it on one end of point to point (not subinterface actual
> point-to-point, but rather a general physical interface point to point
> scenario) connection e.g.
>
> r2(config-if)#frame-relay map ip 2.2.2.5 201 broadcast
> r5(config-if)#frame-relay map ip 2.2.2.2 501 //don't use it
> here
>
>
> I've heard of other "rules" as well, but have been lacking to find any
> reference of this usage in the DOC CD, where I'm trying to base the majority
> of my study/preparation from. Any ideas/comments etc?
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Gregory Wendel Springfield VA, 22153
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:00 ARST