From: madsen.jason@gmail.com
Date: Mon Jan 21 2008 - 03:41:30 ARST
Does anyone know and/or have a good reference for Broadcast usage as it pertains to Frame Relay? I looked through several frame relay broadcast related sections in the DOC CD (e.g. 12.4 -> WAN -> Config -> Frame Relay and also the Command Reference section), but found that they were all quite vague. I've heard and seen several "rules" pertaining to its use such as:
- only use it once per DLCI per interface (or subinterface if that's what you happen to be using) instance e.g.
r1(config-if)#frame-relay map ip 10.10.10.3 101 broadcast
r1(config-if)#frame-relay map ip 10.10.10.4 101 //don't use it here
- only use it on one end of point to point (not subinterface actual point-to-point, but rather a general physical interface point to point scenario) connection e.g.
r2(config-if)#frame-relay map ip 2.2.2.5 201 broadcast
r5(config-if)#frame-relay map ip 2.2.2.2 501 //don't use it here
I've heard of other "rules" as well, but have been lacking to find any reference of this usage in the DOC CD, where I'm trying to base the majority of my study/preparation from. Any ideas/comments etc?
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:00 ARST