From: mgreenlee@ipexpert.com
Date: Wed Jan 16 2008 - 17:40:40 ARST
If doing this on your PC, there is not one single "magic answer". The first
question would probably be what operating system your PC is using. Beyond
that, software/driver support is needed.
Is your operating system linux?
http://www.packetfence.org/wiki/index.php?title=802.1q_%26_VLAN_Configuratio
n#VLAN_and_Dot1q_under_Linux
Marvin Greenlee, CCIE #12237 (R&S, SP, Sec)
Senior Technical Instructor - IPexpert, Inc.
A Cisco Learning Partner - We Accept Learning Credits!
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: mgreenlee@ipexpert.com
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand
and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE
Security Lab, CCIE Service Provider Lab, CCIE Voice Lab and CCIE Storage Lab
Certifications.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mohammad
Sent: Tuesday, January 15, 2008 7:01 AM
To: ccielab@groupstudy.com
Subject: Re: encapsulation dot1Q on PC Fastethernet...
Dears experts,
Any suggestions?
On 1/15/08, Mohammad <www.engineer@gmail.com> wrote:
>
> Dears...
> Any switching expert can help me simulting the following configuration in
> my PC ethernet:
>
> interface Fastethernet10/1.3132
> encapsulation dot1Q 3132
>
> I wonder if there is someway (may be simulation software) that could help
> me connecting my PC Fastethernet to a 802.1q trunk port in switch as
802.1tagged interface...
>
> BR,
> Moe
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:00 ARST