From: Goh Kian Seng (kianseng.goh@gmail.com)
Date: Thu Jan 17 2008 - 04:27:36 ARST
you must get a NIC which support dot1q...
after that it will create multiple logical network card for each vlan..
----- Original Message -----
From: "Mohammad" <www.engineer@gmail.com>
To: "nhatphuc" <nhatphuc@gmail.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, January 16, 2008 4:38 PM
Subject: Re: encapsulation dot1Q on PC Fastethernet...
> Thanks for Rob and Hatphuc....
>
> anyone ware of ability to doing this dot1q tagging in Windows...?
>
>
> On 1/16/08, nhatphuc <nhatphuc@gmail.com> wrote:
>>
>> Use module 8021q in Linux and vconfig to add vlan.
>>
>> Google 8021q and vconfig
>>
>> HTH,
>>
>>
>> On Jan 15, 2008 7:01 PM, Mohammad <www.engineer@gmail.com > wrote:
>>
>> > Dears experts,
>> >
>> > Any suggestions?
>> >
>> >
>> >
>> > On 1/15/08, Mohammad <www.engineer@gmail.com> wrote:
>> > >
>> > > Dears...
>> > > Any switching expert can help me simulting the following
>> > > configuration
>> > in
>> > > my PC ethernet:
>> > >
>> > > interface Fastethernet10/1.3132
>> > > encapsulation dot1Q 3132
>> > >
>> > > I wonder if there is someway (may be simulation software) that could
>> > help
>> > > me connecting my PC Fastethernet to a 802.1q trunk port in switch as
>> > 802.1tagged interface...
>> > >
>> > > BR,
>> > > Moe
>> >
>> >
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>> >
>> >
>>
>>
>
>
> --
> Best Regards,
> Mohammad
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:00 ARST