From: Jack Flash (jack.flash@inbox.com)
Date: Wed Jan 16 2008 - 09:30:37 ARST
Some network cards will run dot1q, you'll probably have to change your NIC
to one that does.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mohammad
Sent: 15 January 2008 12:01
To: ccielab@groupstudy.com
Subject: Re: encapsulation dot1Q on PC Fastethernet...
Dears experts,
Any suggestions?
On 1/15/08, Mohammad <www.engineer@gmail.com> wrote:
>
> Dears...
> Any switching expert can help me simulting the following configuration
> in my PC ethernet:
>
> interface Fastethernet10/1.3132
> encapsulation dot1Q 3132
>
> I wonder if there is someway (may be simulation software) that could
> help me connecting my PC Fastethernet to a 802.1q trunk port in switch as
802.1tagged interface...
>
> BR,
> Moe
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:00 ARST