From: Salau, Yemi (yemi.salau@siemens.com)
Date: Wed Jan 16 2008 - 07:46:34 ARST
Honestly Scott,
This kind of question is best handled/resolved by the Proctor. If you're
unlucky to meet a "Not-So-Totally-Happy" Proctor, then he will say "Do
what you think is right" ... I hate it when I hear that in the Lab!!!!!
Drive me nuts!
To me, such a question has no bearing with a CCIE's level of technical
ability, just one of those semantics you can't afford to miss out on.
Ofcourse, one will have to know how to convert to HEX in the first
instance, even in the dreams.... Yea, I remember doing all those while
sleeping before, well my brain nerves was still working while asleep ...
This was long time ago in my grad school.
Many Thanks.
Yemi Salau
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Scott Morris
Sent: Tuesday, January 15, 2008 2:47 AM
To: 'George Goglidze'; 'Cisco certification'
Subject: RE: IPV6 question understanding
Being that IPv6 is a hex-based address, I would convert it to hex to
have
the same binary equivalent.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
JNCIE-M
#153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
VP - Technical Training - IPexpert, Inc.
IPexpert Sr. Technical Instructor
A Cisco Learning Partner - We Accept Learning Credits!
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
George Goglidze
Sent: Sunday, January 13, 2008 5:31 PM
To: Cisco certification
Subject: IPV6 question understanding
Hi all,
I have one question,
if on the IPv6 section, they ask you to enable eui-64 and they give you
subnet let's say 2001:aaa:111::0/64 but they tell you, you should use
IPv4
address's 3rd octet in the network of IPV6.
and let's say you have in IPv4 25.25.56.1/24 do you just take 56 and put
in
network as following: 2001:aaa:111:56::/64 or you translate 56 to HEX
and
put 38(hex of 56) -> 2001:aaa:111:38::/64
I think I need to use directly 56, but I would like some to confirm me
this.
Many thanks,
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:00 ARST