From: George Goglidze (goglidze@gmail.com)
Date: Tue Jan 15 2008 - 06:46:01 ARST
Many thanks,
Regards,
On Jan 15, 2008 3:47 AM, Scott Morris <smorris@ipexpert.com> wrote:
> Being that IPv6 is a hex-based address, I would convert it to hex to have
> the same binary equivalent.
>
> HTH,
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
> JNCIE-M
> #153, JNCIS-ER, CISSP, et al.
> CCSI/JNCI-M/JNCI-ER
> VP - Technical Training - IPexpert, Inc.
> IPexpert Sr. Technical Instructor
>
> A Cisco Learning Partner - We Accept Learning Credits!
>
> smorris@ipexpert.com
>
>
>
> Telephone: +1.810.326.1444
> Fax: +1.810.454.0130
> http://www.ipexpert.com
>
>
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> George Goglidze
> Sent: Sunday, January 13, 2008 5:31 PM
> To: Cisco certification
> Subject: IPV6 question understanding
>
> Hi all,
>
> I have one question,
>
> if on the IPv6 section, they ask you to enable eui-64 and they give you
> subnet let's say 2001:aaa:111::0/64 but they tell you, you should use IPv4
> address's 3rd octet in the network of IPV6.
>
> and let's say you have in IPv4 25.25.56.1/24 do you just take 56 and put
> in
> network as following: 2001:aaa:111:56::/64 or you translate 56 to HEX and
> put 38(hex of 56) -> 2001:aaa:111:38::/64
>
> I think I need to use directly 56, but I would like some to confirm me
> this.
>
> Many thanks,
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:59 ARST