From: Darren Johnson (dazza_johnson@yahoo.co.uk)
Date: Fri Jan 11 2008 - 15:01:55 ARST
I would personally go for the first option, as this is the way discussed on
the documentation CD at:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hcf_c/
ch15/cfhanstl.htm#wp1199668
There is no mention of the second method, and I havent tried it - although I
always try do things the way of the documentation CD!
Dazzler
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Navid Daghighi
Sent: 08 January 2008 21:29
To: Cisco certification
Subject: bootp
Hi,
cisco doc says :
"The staging router learns the correct IP address to provide in its
BOOTP response to the router that is
being configured with AutoInstall by examining the frame-relay map ip
ip-address dlci command that
is configured on the interface that it is using to connect to the router
that is being configured with
AutoInstall."
So, are we free to type :
1- either "frame-relay map ip A.B.C.D DLCI"
2 - or "frame-relay interface-dlci DLCI protocol ip A.B.C.D"
will these commands give the same result ?
IE R&S lab 3 SG indicates to use the second option,
would the first option also be correct in this task ?
thanks,
Navid
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:59 ARST