From: Monica Belluci (mpls1979@gmail.com)
Date: Fri Jan 11 2008 - 09:32:42 ARST
guys,
just changing encp will not solve the problem
Even Clear frame-relay inarp ,default int s1/0 will not remove 0.0.0.0 entries
Better way to remove 0.0.0.0 mapping do
no frame-relay inverse-arp save configuration
RELOAD it
thanks
Nalini Roy
On 1/11/08, Alexandre Ribeiro <alexandregomesribeiro@gmail.com> wrote:
> Hello all,
>
> Even with "no frame inverse" 0.0.0.0 mappings may appear. A 0.0.0.0 mapping
> means that there was an error in the inverse arp process. In order to avoid
> it you have to configure an FR interface in the correct order:
>
> - Shut the interface
> - do a "no enc frame" or a "enc hdlc" to reset the frame relay process
> - do "enc frame"
> - do "no frame inverse"
> - do everything else
> - do a "no shut" on the interface
>
> The above order of operations will insure that you won't run into "0.0.0.0"
> mapping issues.
>
> Alex
>
> On Jan 10, 2008 8:48 AM, Felix Nkansah <felixnkansah@gmail.com> wrote:
>
> > HI,
> >
> > The 'no arp frame' command is not necessary.
> >
> > It only makes your configs longer. Maybe it was useful in some
> pre-10.xIOS.
> >
> > The 'no frame inverse-arp' command is enough to stop dynamic
> > inverse-arping
> > and the '0.0.0.0' from appearing.
> >
> > My 2 pesewas.
> >
> > Regards,
> >
> > Felix
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST