From: Alexandre Ribeiro (alexandregomesribeiro@gmail.com)
Date: Fri Jan 11 2008 - 09:24:30 ARST
Hello all,
Even with "no frame inverse" 0.0.0.0 mappings may appear. A 0.0.0.0 mapping
means that there was an error in the inverse arp process. In order to avoid
it you have to configure an FR interface in the correct order:
- Shut the interface
- do a "no enc frame" or a "enc hdlc" to reset the frame relay process
- do "enc frame"
- do "no frame inverse"
- do everything else
- do a "no shut" on the interface
The above order of operations will insure that you won't run into "0.0.0.0"
mapping issues.
Alex
On Jan 10, 2008 8:48 AM, Felix Nkansah <felixnkansah@gmail.com> wrote:
> HI,
>
> The 'no arp frame' command is not necessary.
>
> It only makes your configs longer. Maybe it was useful in some pre-10.xIOS.
>
> The 'no frame inverse-arp' command is enough to stop dynamic
> inverse-arping
> and the '0.0.0.0' from appearing.
>
> My 2 pesewas.
>
> Regards,
>
> Felix
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST