From: wim.depauw@getronics.com
Date: Wed Jan 09 2008 - 18:24:26 ARST
Hi,
I tried to configure auto-install over Frame-relay but it doesn't seem to work
My setup is the following :
TFTP(pc)-------R1-----FR-----R2
R1 and R2 are connect back to back , R1 has the DCE connector
R2 will need to get his config from R1
interface Serial0/3/0.1 point-to-point
ip address 192.168.2.1 255.255.255.252
ip helper-address 192.168.4.2
frame-relay interface-dlci 101 protocol ip 192.168.2.2
end
I don't see any packets coming in to the tftp -server ( sniffed it ).
According to cisco doc this should be the config .
Does anybody have an idea ?
gr
wim
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST