From: Bob Sinclair (bob@bobsinclair.net)
Date: Sun Jan 06 2008 - 15:04:44 ARST
ladeegeek@gmail.com wrote:
> Hi all -
>
> I've been working with forming ospf neighbors with different interface types. I'm currently trying to work out a "glitch" between an NMBA and Point-to-multipoint interface. I get neighborship, my database is populated, BUT the database doesn't populate the routing table. See below. If I make all the interfaces point-to-mulitpoint I get the same database and my routing table populates??
>
Right u ARE! These are network types are inconsistent, so OSPF cannot
use the learned LSAs. If you open up the relevant router LSA you will
probably see it is marked "Advertising Router Unreachable" Check out
this link for reasons LSAs do not lead to routes in the table:
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009481a.shtml
This is document ID 7112
Well worth your study time!
--Bob Sinclair CCIE 10427 CCSI 30427 www.netmasterclass.net
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST