From: ladeegeek@gmail.com
Date: Sun Jan 06 2008 - 14:26:11 ARST
Hi all -
I've been working with forming ospf neighbors with different interface types. I'm currently trying to work out a "glitch" between an NMBA and Point-to-multipoint interface. I get neighborship, my database is populated, BUT the database doesn't populate the routing table. See below. If I make all the interfaces point-to-mulitpoint I get the same database and my routing table populates??
router ospf 1
router-id 150.1.1.1
log-adjacency-changes
network 132.1.0.0 0.0.0.255 area 0
network 132.1.17.0 0.0.0.255 area 0
network 150.1.1.1 0.0.0.0 area 0
neighbor 132.1.0.2
neighbor 132.1.0.4
interface Serial1/0
ip address 132.1.0.1 255.255.255.0
encapsulation frame-relay
ip ospf network non-broadcast
ip ospf priority 255
serial restart-delay 0
no fair-queue
no frame-relay inverse-arp IP 103
!
R1#sho ip ospf neigh
Neighbor ID Pri State Dead Time Address Interface
150.1.7.7 1 FULL/DR 00:00:32 132.1.17.7 Ethernet0/0
150.1.2.2 0 FULL/DROTHER 00:01:53 132.1.0.2 Serial1/0
150.1.4.4 0 FULL/DROTHER 00:01:53 132.1.0.4 Serial1/0
!
R1#sho ip ospf dat
OSPF Router with ID (150.1.1.1) (Process ID 1)
Router Link States (Area 0)
Link ID ADV Router Age Seq# Checksum Link count
150.1.1.1 150.1.1.1 11 0x80000004 0x00DBDC 3
150.1.2.2 150.1.2.2 13 0x80000003 0x00578A 4
150.1.3.3 150.1.3.3 102 0x80000002 0x003AF7 5
150.1.4.4 150.1.4.4 11 0x80000003 0x0021AF 4
150.1.7.7 150.1.7.7 88 0x80000002 0x002180 1
Net Link States (Area 0)
Link ID ADV Router Age Seq# Checksum
132.1.0.1 150.1.1.1 11 0x80000001 0x00D967
132.1.17.7 150.1.7.7 88 0x80000001 0x007344
Summary Net Link States (Area 0)
Link ID ADV Router Age Seq# Checksum
132.1.26.0 150.1.2.2 83 0x80000003 0x00965F
204.12.1.0 150.1.7.7 129 0x80000001 0x003D76
Type-5 AS External Link States
Link ID ADV Router Age Seq# Checksum Tag
132.1.23.0 150.1.3.3 134 0x80000001 0x00A8BD 0
132.1.33.0 150.1.3.3 136 0x80000001 0x003A22 0
R1#
R1#sho ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
O IA 204.12.1.0/24 [110/20] via 132.1.17.7, 00:02:06, Ethernet0/0
132.1.0.0/24 is subnetted, 2 subnets
C 132.1.0.0 is directly connected, Serial1/0
C 132.1.17.0 is directly connected, Ethernet0/0
150.1.0.0/24 is subnetted, 1 subnets
C 150.1.1.0 is directly connected, Loopback0
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST