From: Joseph Brunner (joe@affirmedsystems.com)
Date: Tue Jan 01 2008 - 20:33:40 ARST
According to the ios feature navigator you'll need a 3550/3560 switch at the
minimum to support this feature.
-Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
arali
Sent: Tuesday, January 01, 2008 5:18 PM
To: ccielab; ccielab-subscribe; cisco
Subject: Dynamips support private-vlan commands
Hi Groups,Here I stopped in below command to apply in my
home lab switch using "DYNAMIPS".!!The commands tried in
switch not supporting under dynamips.private-vlan primary/private-vlan
association 281!!! Dynamips using cisco ios version
"c3640-ik9s-mz.124-3b.bin", any clue / pass some tips else any recomended
IOS to use.Regards,Aralee
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:57 ARST