From: Edison Ortiz (edisonmortiz@gmail.com)
Date: Tue Jan 01 2008 - 21:44:00 ARST
Private Vlan relies on the switch's ASIC which is absent on any virtual
representation of an IOS.
For more information on Private Vlan, please read:
http://www.cisco.com/warp/public/473/194.html
And also
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note0918
6a0080094830.shtml
As for your CCIE preparation, I recommend getting a 3560 (8 Port Switch) for
Private Vlan preparation, if money is a concern.
The 3550 does not support full fledge Private LANs, just protected ports.
Edison Ortiz
Routing and Switching, CCIE # 17943
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
arali
Sent: Tuesday, January 01, 2008 5:18 PM
To: ccielab; ccielab-subscribe; cisco
Subject: Dynamips support private-vlan commands
Hi Groups,Here I stopped in below command to apply in my
home lab switch using "DYNAMIPS".!!The commands tried in
switch not supporting under dynamips.private-vlan primary/private-vlan
association 281!!! Dynamips using cisco ios version
"c3640-ik9s-mz.124-3b.bin", any clue / pass some tips else any recomended
IOS to use.Regards,Aralee
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:57 ARST