From: Tarun Pahuja (pahujat@gmail.com)
Date: Sat Dec 29 2007 - 16:17:58 ART
Frog,
If you are dealing with T1/E1 controllers, simply do not put "ccm
manager config-server x.x.x.x" command on the mgcp gateway. Now you are
choose any successive # of channels per gateway as you want. The only
disadvantage is that you will have to manual reset the gateway when needed
and also the callmanager will not be able to push the configuration anymore.
HTH,
Tarun
On Dec 27, 2007 4:24 AM, Radioactive Frog <pbhatkoti@gmail.com> wrote:
> Godswill,
>
> there are total 5 row in CCM where you can put different E1 ports channel
> settings (as Avner suggested).
> So maximum 5 E1/T1 channels in total.
>
> For example:
>
> Change B-Channel Maintenance Status 1 S2/DS1-0@BR1 = 0000 0111 1111
> 1111
> 1111 1111
> Change B-Channel Maintenance Status 2 S2/DS1-1@BR1 = 0000 0111 1111
> 1111
> 1111 1111
> Change B-Channel Maintenance Status 3 S2/DS1-2@BR1 = 0000 0111 1111
> 1111
> 1111 1111
> Change B-Channel Maintenance Status 4 S2/DS1-3@BR1 = 0000 0111 1111
> 1111
> 1111 1111
> Change B-Channel Maintenance Status 5 S2/DS1-4@BR1 = 0000 0111 1111
> 1111
> 1111 1111
>
> Cheers
> Frog
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:32 ARST