From: Han Solo (hansolo@ccieunix.com)
Date: Fri Dec 28 2007 - 14:36:38 ART
I save the config's to flash on each of the local boxes. And also do so at
different stages. So for example on R1 I might have the following in
flash:
nmc-1-r1-igp.txt
nmc-1-r1-preconfig.txt
nmc-1-r1-complete.txt
So if I want to play with ios features and such I would load the following
copy flash start and give file nmc-1-r1-igp.txt. It works good for me and
litterly takes only minutes. Only gotcha is you have to have the flash
space I have all 3640 with max flash so no problem. I used to run off from
a tftp server and that works well also but is more time consuming.
hth
On Fri, 28 Dec 2007, Wilson, Ryan # Atlanta wrote:
> I was wondering if someone could lead me in the right direction. I have
> a LAB and I would like the ability to save and load my config files
> dynamically. I have seen this done in class room environments, but I'm
> not how. Does anyone know of a solution?
>
>
>
> Ryan
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:32 ARST