From: steveaggie@gmail.com
Date: Thu Dec 27 2007 - 21:38:21 ART
Has anyone had trouble with OSPF routes not being added to your routing
table even though they're unique routes? I've been having a heck of a time
with 2 routers forming an adjacency. My topology looks like this:
R2---frame-------R3
R2 is a p2p sub interface. R3 is a physical interface. Both are configured
as non-broadcast and the other neighbor is specified.
They don't seem to send hellos every 30 seconds, but once in a blue moon.
They will get up to EXSTART on R2 and 2WAY on R3 but eventually the dead
timer goes off and they start over. If I change the network type on both to
broadcast they will get to FULL pretty quickly, but then R2 never puts the
routes in the routing table even though they show up in the OSPF database.
One time I rebooted the whole network and everything worked fine (in
non-broadcast mode). I'm using dynamips so I'm wondering if it's somehow
related. I can run a continuous ping between the routers and not drop a
packet.
Please help before I pull my hair out.
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:32 ARST