From: Joseph Saad (joseph.samir.saad@gmail.com)
Date: Wed Dec 26 2007 - 15:01:38 ART
Cisco "Recommnds" configured rate (in bps) * 1.5 sec / 8 (bit) of the limit
and the value is in bytes. I'd go with the recommendation if nothing else is
mentioned.
The "minimum" value is bps divided by 2000.
I'd go with the "recommended" unless there's a constraint such as burst to
be of a specific value.
Joseph.
On Dec 26, 2007 9:21 PM, PANDI MOORTHY <moorthypandi@gmail.com> wrote:
> Hi All
>
>
>
> Need your help on calculating minimum burst values for CAR
>
>
>
> My task is to limit the traffic entering the network to 1M with minimum
> burst value using CAR
>
>
>
> As per Cisco documentation, the minimum value is bps divided by 2000
>
>
>
> So for my case BC would be; 1000000 / 2000 = 500 bytes (but in IOS
> starting
> BC value from 1500)
>
>
>
> Is the above formula is correct? Please confirm.
>
>
>
>
>
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hqos_r/qos_q1h.htm#wp1080850
>
>
>
> Regards
> Pandi
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:32 ARST