From: Bob Sinclair (bob@bobsinclair.net)
Date: Tue Dec 25 2007 - 16:12:30 ART
Athaide, Dwayne wrote:
> Now I know that I can apply the prefix list directly
> to the neighbor and it works fine however still confused as to why I
> cannot call the prefix in the distribute.
>
>
The common, but not very satisfying answer is: because that is the way
they wrote the software! On my 3800 12.4T prefix-list is not listed as
an option:
R2(config-router)#nei 1.1.1.1 distribute-list ?
<1-199> IP access list number
<1300-2699> IP access list number (expanded range)
WORD IP Access-list name
R2(config-router)#nei 1.1.1.1 distribute-list
So I guess the command reference that you copied in your message is
either dated or just wrong. Would not be the first time!
HTH,
--Bob Sinclair CCIE 10427 CCSI 30427 www.netmasterclass.net
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:32 ARST