From: Lora Ganeva (lganeva@mobiltel.bg)
Date: Fri Dec 21 2007 - 10:33:59 ART
For me this is OK but you must add
Mls qos trust dscp interface level command.
BR,
Lora
P.S. I use this in my own network and it is working:)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Athaide, Dwayne
Sent: 21 dEKEMWRI 2007 G. 01:23
To: groupstudy
Subject: QOS
Question states that the incoming DSCP values matching any of the
following IP Prec valves of 1,2,3,4 should be reverted back to DSCP 0.
Would my way be correct as well?
thanks
My solution
class-map match-all SET-DSCP
match ip dscp cs1 cs2 cs3 cs4
!
!
policy-map SET-DSCP
class SET-DSCP
set dscp default
Answer guide
mls qos map dscp-mutation DSCP0 8 16 24 32 to 0
Dwayne Athaide | Network Architecture Specialist | EPCO, Inc. |
2727 N Loop West Houston, TX 77008
713.803.2401 office | 713 803 2999 fax| dathaide@eprod.com
<mailto:dathaide@eprod.com> |
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:31 ARST