From: Joseph Saad (joseph.samir.saad@gmail.com)
Date: Fri Dec 21 2007 - 10:55:15 ART
and "mls qos" in either cases.
On Dec 21, 2007 5:33 PM, Lora Ganeva <lganeva@mobiltel.bg> wrote:
> For me this is OK but you must add
>
> Mls qos trust dscp interface level command.
>
> BR,
> Lora
>
> P.S. I use this in my own network and it is working:)
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Athaide, Dwayne
> Sent: 21 dEKEMWRI 2007 G. 01:23
> To: groupstudy
> Subject: QOS
>
> Question states that the incoming DSCP values matching any of the
> following IP Prec valves of 1,2,3,4 should be reverted back to DSCP 0.
> Would my way be correct as well?
>
> thanks
>
>
>
> My solution
>
> class-map match-all SET-DSCP
>
> match ip dscp cs1 cs2 cs3 cs4
>
> !
>
> !
>
> policy-map SET-DSCP
>
> class SET-DSCP
>
> set dscp default
>
>
>
> Answer guide
>
> mls qos map dscp-mutation DSCP0 8 16 24 32 to 0
>
>
>
>
>
> Dwayne Athaide | Network Architecture Specialist | EPCO, Inc. |
>
> 2727 N Loop West Houston, TX 77008
>
> 713.803.2401 office | 713 803 2999 fax| dathaide@eprod.com
> <mailto:dathaide@eprod.com> |
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:31 ARST