From: srinivas pv (vsrinivas.paturi@gmail.com)
Date: Wed Dec 19 2007 - 15:28:27 ART
Hi,
I am not sure which volume you are using. But in 4.1, the solution is 'ip
ospf non-broadcast' and 'neighbor'.
Thanks,
Srinivas
On 19 Dec 2007 15:57:39 -0000, daniel <danyccie@rediffmail.com> wrote:
> Hi Group,I was trying to do Internetwork Expert Service provider work book
> Lab1 Task 2.3. It asks me to "Ensure that other devices in the segment are
> not able to intercept any ospf traffic betweek R2 and R6" .
> There is an ethernet segment between R2 and R6. My answer to this question
> is Under R6 and R2 interface I configure ip ospf network non-broadcast and
> under router ospf 1 I configure neighbor command pointing to each
> other.But to my surprise Internetwork Experts has given the solution as ip
> ospf network point-to-multipint non-broadcast under the interface and the
> neighbor command under the router ospf 1.Can someone tell me why is this
> point-to-multipint required here.Thanks,Dany
>
>
> Regards,
> Dany
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:31 ARST