From: Paul Cosgrove (paul.cosgrove@heanet.ie)
Date: Sun Dec 16 2007 - 18:22:27 ART
Hi Adam,
You are using PIM BiDir and so your incoming interface is also on the
shared tree. This is the interface listed in the outgoing interface
list, do you have any other receivers?
Paul.
Adham Ali wrote:
> Hello All,
>
> please check below !
>
> R2#show ip mroute 235.5.5.5
> IP Multicast Routing Table
> Interface state: Interface, Next-Hop or VCD, State/Mode
> (*, 235.5.5.5), 00:03:26/00:02:59, RP 2.2.2.2, flags: B
> Bidir-Upstream: Null, RPF nbr 0.0.0.0
> Outgoing interface list:
> Serial0/0/0.124, 124.124.124.4, Forward/Sparse, 00:03:26/00:02:59#########
> ----------------------------------
> *Dec 16 14:24:41.007: IP(0): s=1.1.1.1 (Serial0/0/0.124) d=235.5.5.5 id=323, ttl=253, prot=1, len=104(100), mroute olist null
>
>
> As you see, there is and interface in the Outgoing interface list but in the same time debugs
> tell me that mroute olist null!!!!!!
>
> Serial 0/0/0.124 is a multipoint interface with IP pim nbma-mode enabled!
>
>
> Any reason for this?
>
>
> Thank you in advance.
>
> Adham
>
>
>
> ---------------------------------
> Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:31 ARST