From: Greg Wendel (gwendel@gmail.com)
Date: Sun Dec 16 2007 - 01:31:14 ART
Scott,
I couldn't help but comment that a if man with a lab that needs its own
power plant is using dynamips then it is definitely going places.
Thanks,
On Dec 15, 2007 10:58 PM, Scott Morris <swm@emanon.com> wrote:
> I've just been playing around with things since it's gaining popularity.
> Personally I still use real equipment... But the Mac worked wonderfully.
> OS on mine is 10.4 OS/x. I haven't upgraded it to 10.5 yet, but will
> likely
> do that soon.
>
> It's nice, quiet and not that hot. :)
>
> Scott
>
> _____
>
> From: ciscosurplus@gmail.com [mailto:ciscosurplus@gmail.com] On Behalf Of
> Graham Clarke
> Sent: Saturday, December 15, 2007 4:30 PM
> Cc: darth router; Scott Morris; Li Xiao Shawn NCS; ccielab@groupstudy.com
> Subject: Re: dyanmips lab setup help needed: how to install 12 usb network
> card?
>
>
> Scott,
>
> Mac mini seems to ba popular weapon of choice, what is the performance
> like
> on a fully loaded lab? ie BGP flaps etc? Also what OS do you run on them?
> Sounds a lot better than the massive sever that generates more radiation
> than chernoby I currently use.
>
> Thanks
>
> Graham
>
> On 15/12/2007, Laidlaw, Patrick A. <Patrick.Laidlaw@wwt.com> wrote:
>
> Li,
>
> I would have to agree go buy three 4 port nics you'll be much happier in
> the end. I've been using three that have worked flawless for the last
> year.
>
> Patrick
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> darth router
> Sent: Saturday, December 15, 2007 11:17 AM
> To: Scott Morris
> Cc: Li Xiao Shawn NCS; ccielab@groupstudy.com
> Subject: Re: dyanmips lab setup help needed: how to install 12 usb
> network card?
>
> Hey Li,
>
> maybe your having a USB driver issue of some sort. I've used USB nics
> without problem. I'm not much of a PC guy anymore, but I have noticed
> different systems tank when you plug in a few USB devices in Windows.
> Those NIO_GEN_eth ids change (long time ago, so not 100% sure) when you
> pull the USB Nics off and add them back on, so that pissed me off and I
> ended up buying 3
> 4 port NICs. If you get them, make sure you have a large ATX case. The
> cards are long.
>
> http://cgi.ebay.com/ZNYX-4-PORT-NETWORK-INTERFACE-CARD-NIC-MODEL-ZX346Q_
> W0QQitemZ170177548909QQihZ007QQcategoryZ51195QQssPageNameZWDVWQQrdZ1QQcm
> dZViewItem
>
> On 12/15/07, Scott Morris <swm@emanon.com> wrote:
> >
> > I haven't done this with Windows at all, but I have 12 nic's running
> > on a Mac Mini without issue. (little slow in booting, but other than
> > that
> > good)
> >
> > HTH,
> >
> >
> > Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
> > JNCIE-M #153, JNCIS-ER, CISSP, et al.
> > CCSI/JNCI-M/JNCI-ER
> > VP - Technical Training - IPexpert, Inc.
> > IPexpert Sr. Technical Instructor
> >
> > A Cisco Learning Partner - We Accept Learning Credits!
> >
> > smorris@ipexpert.com <mailto:smorris@ipexpert.com>
> >
> >
> >
> > Telephone: +1.810.326.1444
> > Fax: +1.810.454.0130
> > http://www.ipexpert.com
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of Li Xiao Shawn NCS
> > Sent: Saturday, December 15, 2007 11:50 AM
> > To: ccielab@groupstudy.com
> > Subject: dyanmips lab setup help needed: how to install 12 usb network
>
> > card?
> >
> > Hi experts,
> > Well this may sound dump.. i bought 12 usb nics and hope to setup
> > a full dynamip lab with dedicated nic for each virtual routers.. i
> > bought 3 units of 4-port USB hub for the 12 nics.. the system has no
> > problem recognizing the first 4 nics.. however the moment i add in the
>
> > 5th nic, it crashes with the first nic; when add in the 6th, it
> > crashes with the 2nd.. and so on..
> > I have already spread the usb hubs among the USB ports on my board.. i
>
> > even tried geting pci usb hub but the situation is the same.. not sure
>
> > whether anyone encountered this before and hopefully someone can give
> > mi some advise on
> > this.. I am using windows XP..
> >
> > Thanks and Regards,
> > lx
> >
> > ______________________________________________________________________
> > _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > ______________________________________________________________________
> > _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
> --
> Thanks
>
> Graham Clarke
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Gregory Wendel Springfield VA, 22153
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST