From: Chriss Thomas (chriss1969@gmail.com)
Date: Fri Dec 14 2007 - 16:10:40 ART
Thank you Edison for the valuable answer.
On 12/14/07, Edison Ortiz <edisonmortiz@gmail.com> wrote:
>
> DocCD is your friend
>
>
>
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hcf_r/cfn_01h.htm#wp1129937
>
>
>
> Boot system *flash*
>
>
>
> _________________
>
>
>
> On all platforms except the Cisco 1600 series, Cisco 3600 series, and
> Cisco 7000 family routers, this keyword boots the router from internal flash
> memory. If you omit all arguments that follow this keyword, the system
> searches internal flash for the first bootable image.
>
> On the Cisco 1600 series, Cisco 3600 series, and Cisco 7000 family
> routers, this keyword boots the router from the flash file system specified
> by *flash-fs*. On the Cisco 1600 series and Cisco 3600 series routers, if
> you omit all optional arguments, the router searches internal flash memory
> for the first bootable image. On the Cisco 7000 family routers, when you
> omit all arguments that follow this keyword, the system searches the PCMCIA
> slot 0 for the first bootable image.
>
> _________________
>
>
>
>
>
> Edison Ortiz
>
> Routing and Switching, CCIE # 17943
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Chriss Thomas
> Sent: Friday, December 14, 2007 8:00 AM
> To: ccielab@groupstudy.com
> Subject: boot command
>
>
>
> Experts,
>
> What is the difference between:
>
> boot system disk0:xxxxxxxxxxxxxxxx.bin
>
> and
>
> boot system flash disk0:xxxxxxxxxxxxxxxx.bin
>
>
>
>
>
> Rgrds,
>
> Chriss
>
>
>
> _______________________________________________________________________
>
> Subscription information may be found at:
>
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST