From: subodh.rawat@wipro.com
Date: Thu Dec 13 2007 - 08:36:15 ART
One way is there however:
You can redistribute routes at R1. This will cause all routes to become
as External EIGRP routes and hence will carry an AD of 170. and routes
learned from R3 will carry default AD of 90.
HTH
Subodh
-----Original Message-----
From: Subodh Singh Rawat (WT01 - TELECOM SERVICE PROVIDER)
Sent: Thursday, December 13, 2007 4:55 PM
To: 'Arun Kumar Arumuganainar'
Cc: Cisco certification
Subject: RE: Configuring Distance Per Neighbor
Can be done with offset list.
Distance has no effect on same routing protolcs (EIGRP in this case).
HTH
Subodh
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Arun Kumar Arumuganainar
Sent: Thursday, December 13, 2007 4:25 PM
To: Radioactive Frog; nhatphuc
Cc: Cisco certification
Subject: Configuring Distance Per Neighbor
Hi ,
I have a problem.
R1 ----R2----R3
The network is running eigrp. I wanted to assign Higher admin distance
to all routes learned from R1 and lower admin distance to all routes
learned from R3 .
Configuration needs to be done on R2.
I know it can be done using inverse mask and ACL . But could not figure
out how to do this.
It will be very helpful if some body let me know how to do it .
Thanks and Regards
Arun
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST