From: itsfortarget iwillgetit (itsfortarget@gmail.com)
Date: Wed Dec 12 2007 - 10:53:15 ART
On 12/12/07, v.shekhar@yahoo.com <v.shekhar@yahoo.com> wrote:
>
> so if the switch is 3550,is it mandatory toconfigure reflector
> port??Depends on Switch platform, if its 3550 Yes, 3750 & 3560 works fine
> with the below config.
>
> Thanks,
> -sHekHar.
> CCIE#17589/CISSP/RHCE.
>
> ----- Original Message ----
> From: itsfortarget iwillgetit <itsfortarget@gmail.com>
> To: v.shekhar@yahoo.com
> Cc: Joseph Saad <joseph.samir.saad@gmail.com>; Cisco certification <
> ccielab@groupstudy.com>
> Sent: Wednesday, December 12, 2007 7:01:00 PM
> Subject: Re: RSPAN ISSUE....
>
> in this topology no need of configuring reflecting port??
>
> On 12/12/07, v.shekhar@yahoo.com <v.shekhar@yahoo.com> wrote:
> >
> > As per my understanding of this scenario, SW1 is the VTP Server hence
> > VLANs needs to be added to the Server only, and NOT in clients.
> > HTH
> > -sHekHar.
> > CCIE#17589/CISSP/RHCE.
> >
> > ----- Original Message ----
> > From: Joseph Saad <joseph.samir.saad@gmail.com>
> > To: Cisco certification < ccielab@groupstudy.com>
> > Sent: Wednesday, December 12, 2007 11:58:42 AM
> > Subject: Re: RSPAN ISSUE....
> >
> >
> > That's interesting.
> >
> > in my opinion, this what I would be doing:
> >
> > 1) on all switches that the traffic is transiting for vlan x, you must
> > have
> > vlan x
> > remote-span
> >
> > This could be only sw2 and sw3 or all the 4 switches. depend on the
> > spanning
> > Tree topology and link speeds.
> >
> > 2) ON SW2
> > monitor session 1 source interface gigabitEthernet 0/3 both
> > monitor session 1 dest remote vlan x
> >
> >
> > ON SW3
> > monitor session 1 source remote vlan x
> > monitor session 1 dest interface gigabitEthernnet 0/7
> >
> > HTH,
> >
> > Joseph.
> > On 12/12/07, itsfortarget iwillgetit < itsfortarget@gmail.com> wrote:
> > >
> > > sw-->sw2->sw3->sw4 ita full mesh layer 2 network ,,I hope this is
> > what u
> > > need ..
> > >
> > > On Dec 12, 2007 10:33 AM, Joseph Saad < joseph.samir.saad@gmail.com>
> > wrote:
> > >
> > > > How is the topology look like?
> > > >
> > > > On 12/12/07, itsfortarget iwillgetit < itsfortarget@gmail.com>
> > wrote:
> > > >
> > > > > Daear Grup,
> > > > >
> > > > > Pls throw your light...
> > > > >
> > > > > I have sw1(VTP server ) and sw2 and sw3 as client .I need to
> > monitor
> > > > > th
> > > > > traffic from sw2 (port 0/3) to sw 3 ( port 0/7)
> > > > >
> > > > > letm ek now how to do it
> > > > >
> > > > > Regards
> > > > >
> > > > >
> > > > >
> > > > >
> > _______________________________________________________________________
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> > ____________________________________________________________________________________
> > Be a better friend, newshound, and
> > know-it-all with Yahoo! Mobile. Try it now.
> > http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
>
>
> ------------------------------
> Never miss a thing. Make Yahoo your homepage.<http://us.rd.yahoo.com/evt=51438/*http://www.yahoo.com/r/hs>
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST