From: v.shekhar@yahoo.com
Date: Wed Dec 12 2007 - 10:41:22 ART
Depends on Switch platform, if its 3550 Yes, 3750 & 3560 works fine with the below config.
Thanks,
-sHekHar.
CCIE#17589/CISSP/RHCE.
----- Original Message ----
From: itsfortarget iwillgetit <itsfortarget@gmail.com>
To: v.shekhar@yahoo.com
Cc: Joseph Saad <joseph.samir.saad@gmail.com>; Cisco certification <ccielab@groupstudy.com>
Sent: Wednesday, December 12, 2007 7:01:00 PM
Subject: Re: RSPAN ISSUE....
in this topology no need of configuring reflecting port??
On 12/12/07, v.shekhar@yahoo.com <v.shekhar@yahoo.com> wrote:
As per my understanding of this scenario, SW1 is the VTP Server hence VLANs needs to be added to the Server only, and NOT in clients.
HTH
-sHekHar.
CCIE#17589/CISSP/RHCE.
----- Original Message ----
From: Joseph Saad <joseph.samir.saad@gmail.com>
To: Cisco certification <
ccielab@groupstudy.com>
Sent: Wednesday, December 12, 2007 11:58:42 AM
Subject: Re: RSPAN ISSUE....
That's interesting.
in my opinion, this what I would be doing:
1) on all switches that the traffic is transiting for vlan x, you must
have
vlan x
remote-span
This could be only sw2 and sw3 or all the 4 switches. depend on the
spanning
Tree topology and link speeds.
2) ON SW2
monitor session 1 source interface gigabitEthernet 0/3 both
monitor session 1 dest remote vlan x
ON SW3
monitor session 1 source remote vlan x
monitor session 1 dest interface gigabitEthernnet 0/7
HTH,
Joseph.
On 12/12/07, itsfortarget iwillgetit <
itsfortarget@gmail.com> wrote:
>
> sw-->sw2->sw3->sw4 ita full mesh layer 2 network ,,I hope this is
what u
> need ..
>
> On Dec 12, 2007 10:33 AM, Joseph Saad <
joseph.samir.saad@gmail.com>
wrote:
>
> > How is the topology look like?
> >
> > On 12/12/07, itsfortarget iwillgetit <
itsfortarget@gmail.com>
wrote:
> >
> > > Daear Grup,
> > >
> > > Pls throw your light...
> > >
> > > I have sw1(VTP server ) and sw2 and sw3 as client .I need to
monitor
> > > th
> > > traffic from sw2 (port 0/3) to sw 3 ( port 0/7)
> > >
> > > letm ek now how to do it
> > >
> > > Regards
> > >
> > >
> > >
> > >
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST