From: Mohammad Saeed (mzsaeed@gmail.com)
Date: Tue Dec 11 2007 - 13:23:08 ART
As he put it, the NIC are full duplex so the actual transfer speed
shall be 200 Mbps, so in that case it shall be
280000/200 = 1400 Sec and app. 23 minutes.....
Regards,
Mohammad Zahed Saeed
On Dec 11, 2007 8:18 AM, Wilhelm Boeddinghaus <wilhelm@boeddinghaus.de> wrote:
> Hi,
>
> there are many different linecards for the 6500 series. Which gigabit
> linecard do you have? Have you got a switchfabric in the switch?
>
> If you have 6148 or 6548 cards do not give the servers ports next to
> each other. On some cards 8 or 12 ports share buffer and memory.
>
> Greetings
>
> Wilhelm
>
>
> itsfortarget iwillgetit schrieb:
>
> > Dear Group,
> >
> > Pls find a solution for this problem.
> >
> > I have two server connected to a 6509 Switch's Gigabit ethernet
> > Ports.Oneserver(old)'s Bandwidth is 100 Mbps.
> >
> > I have to copy data having size of 35 GB from Old to new ,Copying delayed so
> > much.
> >
> > *Suppose the data transfer takes place at 100 Mbps Because Old is working in
> > 100 Mbps.
> >
> > Then it should take* 5.973333333 *Minutes(ie 35 GB / 100 MB)
> >
> > *But it takes *43* Minutes.
> >
> > *Both NICs are full duplex
> >
> > *I have checked Auto negotiation.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST