From: alexandros.sichlimiris@bt.com
Date: Tue Dec 11 2007 - 13:57:19 ART
Line rate is 100Mbps not 200Mbps. Full duplex does not mean 100x2, it
means no CSMA/CD for the segment.
Regards,
Alex
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mohammad Saeed
Sent: 11 December 2007 16:23
To: Cisco certification
Subject: Re: NEED HELP..................
As he put it, the NIC are full duplex so the actual transfer speed
shall be 200 Mbps, so in that case it shall be
280000/200 = 1400 Sec and app. 23 minutes.....
Regards,
Mohammad Zahed Saeed
On Dec 11, 2007 8:18 AM, Wilhelm Boeddinghaus <wilhelm@boeddinghaus.de>
wrote:
> Hi,
>
> there are many different linecards for the 6500 series. Which gigabit
> linecard do you have? Have you got a switchfabric in the switch?
>
> If you have 6148 or 6548 cards do not give the servers ports next to
> each other. On some cards 8 or 12 ports share buffer and memory.
>
> Greetings
>
> Wilhelm
>
>
> itsfortarget iwillgetit schrieb:
>
> > Dear Group,
> >
> > Pls find a solution for this problem.
> >
> > I have two server connected to a 6509 Switch's Gigabit ethernet
> > Ports.Oneserver(old)'s Bandwidth is 100 Mbps.
> >
> > I have to copy data having size of 35 GB from Old to new ,Copying
delayed so
> > much.
> >
> > *Suppose the data transfer takes place at 100 Mbps Because Old is
working in
> > 100 Mbps.
> >
> > Then it should take* 5.973333333 *Minutes(ie 35 GB / 100 MB)
> >
> > *But it takes *43* Minutes.
> >
> > *Both NICs are full duplex
> >
> > *I have checked Auto negotiation.
> >
> >
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST