From: Moe (cisco.addicted@gmail.com)
Date: Sun Dec 09 2007 - 17:18:56 ART
Dear,
I didn't work on the AIM -CUE module before, what I have is NM-CUE; If you
want to shut down the CUE module, try to use this command:
service-module service-Engine4/0 shutdown
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Radioactive Frog
Sent: Sunday, December 09, 2007 3:35 AM
To: Cisco certification
Subject: AIM-cue shutdown
I am trying to shutdown the AIM-cue module. It shuts down but I can still
ping the AIM modules IP (14.10.6.25) address.
interface Service-Engine0/0
ip unnumbered FastEthernet0/0.10
service-module ip address 14.10.6.25 255.255.255.0
service-module ip default-gateway 14.10.6.54
!
Any thought why i am still able to ping it? I was thinking that
service-module ip is related to the whole AIM-module, which I already
shutdown whole unit itself using the command srevice-blah...ha.h.....
But If i shutdown the service-module using blelow command, it stop pinging.
itec#
sitec#
sitec#config t
Enter configuration commands, one per line. End with CNTL/Z.
sitec(config)#int ser
sitec(config)#int servi
sitec(config)#int service-Engine 0/0
sitec(config-if)#shut
sitec(config-if)#
*Dec 9 00:38:52.307: %LINK-5-CHANGED: Interface Service-Engine0/0, changed
state to administratively down
*Dec 9 00:38:53.307: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Service-Engine0/0, changed state to down
sitec(co
sitec#
sitec#
sitec#
sitec#service-module service-Engine 0/0 status
Service Module is Cisco Service-Engine0/0
Service Module supports session via TTY line 66
Service Module is being Shutdown
Service Module status is not available
sitec#
*Dec 9 00:34:27.998: %SERVICEMODULE-5-SHUTDOWN2: Service module
Service-Engine0/0 shutdown complete
sitec#service-module service-Engine 0/0 status
Service Module is Cisco Service-Engine0/0
Service Module supports session via TTY line 66
Service Module is Shutdown
Service Module status is not available
sitec#
sitec#
sitec#service-module service-Engine 0/0 status
Service Module is Cisco Service-Engine0/0
Service Module supports session via TTY line 66
Service Module is Shutdown
Service Module status is not available
sitec#
sitec#
sitec#service-module service-Engine 0/0 status
Service Module is Cisco Service-Engine0/0
Service Module supports session via TTY line 66
Service Module is Shutdown
Service Module status is not available
sitec#service-module service-Engine 0/0 status
Service Module is Cisco Service-Engine0/0
Service Module supports session via TTY line 66
Service Module is Shutdown
Service Module status is not available
sitec#
sitec#
Frog
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST